Click here to go back to the previous page

 

2018 Proficiency Test (PT) on Engine Oil (used) started

 

The letter of instructions can be downloaded here as a pdf document. To download a document, please click the right mouse button and choose the "save as" option.

 

Please download the instructions for the PT iis18L07 here: the letter of instructions and the report form here.

Download the instuctions for iis18L07M here: letter of instructions for Metals and the report form here.

 

Summary of this proficiency test:

 

On 23 May 2018 the proficiency test on Engine Oil (used) started with 80 participants from 47 different countries. On that date, the samples were dispatched to the laboratories. Enclosed to the sample is the material safety data sheet (MSDS).

Please confirm sample receipt as soon as you have received and checked the contents of the sample package via www.kpmd.co.uk/sgs-iis/. Please enter the date of receipt and press the "save date" button.

 

The samples can be analyzed on: Acid Number, Base Number, Density at 15°C, Flashpoint PMcc, Fuel Dilution, Kinematic viscosity at 40°C / at 100°C, Viscosity Index, Kinematic Viscosity Houillon at 40°C / at 100°C, Water and over 20 elemental analysis ( Al, Ba, B, Cd, Cr, Cu, Fe, Pb, Li, Mg, Mn, Mo, Ni, K, Si, Ag, Na, Sn, Ti, V, Ca, P, Zn). 

 

The deadline for reporting results is set on 29 June 2018. A laboratory that reports test results after the deadline will definitely not get direct feedback in case any of its results are suspect! So be in good time to get the most out of this proficiency test.

The test results should be reported via our internet based results reporting platform www.kpmd.co.uk/sgs-iis/. A login and a password can be requested via email to iisnl@sgs.com

 

 

 

iis

©1996-2018 Institute for Interlaboratory Studies